Click here to sign in with or
A new joint study by Southwest Research Institute and Sandia National Laboratories examines the differences in oxide film growth on additively manufactured (AM) metals and wrought stainless steel in a supercritical carbon dioxide (sCO2) environment.
sCO2 is carbon dioxide held above a critical temperature and pressure, which causes it to combine the properties of gas and liquid. Current power plants typically use water as a thermal medium in power cycles. Replacing water with sCO2 increases efficiency by as much as 10 percent, which also allows for considerably smaller turbomachinery and a smaller footprint. Its supercritical state makes sCO2 a highly efficient fluid to generate power because small changes in temperature or pressure cause significant shifts in its density.
SwRI is a leader in sCO2 power cycles. The Institute has received numerous Department of Energy and industry-funded projects to implement pilot-scale sCO2 power cycle components and system-level equipment in addition to the 10 MWe Supercritical Transformational Electric Power (STEP) Pilot Plant under construction at SwRI.
Senior Research Engineer Dr. Florent Bocher began examining how oxidation affects AM materials as part of an existing sCO2 collaborative effort with Sandia National Laboratories.
"The smaller, more complex machinery necessary for the small turbines that sCO2 power cycles utilize makes additive manufacturing an attractive resource," Bocher said.
Additive manufacturing is a novel process that uses 3D printing or rapid prototyping to build an item by layering plastic, metal and other materials for a custom, computer-generated design. Because AM creates sturdy components with intricate design qualities, it appeals to a wide range of users, including the aerospace, medical and manufacturing industries.
"The high temperatures and pressures of the sCO2 environment make oxidation a concern for metal components," Bocher explained. "As these two industries move forward, it's important to understand how oxidation affects them."
To test the durability of AM metals versus traditional wrought stainless steel in the sCO2 environment, Bocher and his collaborators exposed samples of both to a simulated sCO2 power cycle environment, including a temperature of 450 degrees Celsius and pressure of 76 bar, for two weeks. The AM materials were built and analyzed by Sandia National Laboratory.
"Both types of metals showed oxide growth," Bocher said. "But the oxide covered about 72% of the wrought stainless steel and 54% of the AM material, with the grain size and thickness of the oxide layer being statistically larger and thicker for the wrought material. Ultimately, though, this doesn't prove that one is more reliable than the other. More data is needed, but this certainly suggests that AM processes should be optimized going forward for these types of conditions."
The study was published in Corrosion Science. Explore further Team creates supercritical carbon dioxide turbomachinery for concentrated solar power plant More information: Michael A. Melia et al, Initial stages of oxide growth on AM stainless steel exposed to a supercritical CO2 environment, Corrosion Science (2022). DOI: 10.1016/j.corsci.2022.110259 Provided by Southwest Research Institute Citation: Study examines oxide growth in additively manufactured metals in a supercritical carbon dioxide environment (2022, June 13) retrieved 9 October 2022 from https://phys.org/news/2022-06-oxide-growth-additively-metals-supercritical.html This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.
Use this form if you have come across a typo, inaccuracy or would like to send an edit request for the content on this page. For general inquiries, please use our contact form. For general feedback, use the public comments section below (please adhere to guidelines).
Please select the most appropriate category to facilitate processing of your request
Thank you for taking time to provide your feedback to the editors.
Your feedback is important to us. However, we do not guarantee individual replies due to the high volume of messages.
Your email address is used only to let the recipient know who sent the email. Neither your address nor the recipient's address will be used for any other purpose. The information you enter will appear in your e-mail message and is not retained by Phys.org in any form.
Get weekly and/or daily updates delivered to your inbox. You can unsubscribe at any time and we'll never share your details to third parties.
Medical research advances and health news
The latest engineering, electronics and technology advances
The most comprehensive sci-tech news coverage on the web
This site uses cookies to assist with navigation, analyse your use of our services, collect data for ads personalisation and provide content from third parties. By using our site, you acknowledge that you have read and understand our Privacy Policy and Terms of Use.