Agglomerated SAW Welding Flux for Submerged Arc Welding Wire EL8,EM12,EH14
Technical data sheet
Specifications about agglomerated saw welding flux
AWS A5.17/5.23 F7A2-EM12K F7A4-EH14 F7A6-EG-G F8A4-EA4-A4
EN760 SA FB 1 55 AC H5
Description:about agglomerated saw welding flux
SJ101G is an agglomerated fluoride-basic type flux. Basicity: 2.0 (B//W) It is gray and round grain,mesh:10-45(2.0-0.4mm). It can highly satisfy the steel welding requirements for oil gas pipeline. Either AC. or DC.can be used, the wire shall be connected to positive pole when applying DC. It has steady arc and the welding bead smooth and pleasing , rice weld formation, and easy in slag removing as well with perfect deposit metal welding technological characteristics. It has higher low-temperature impact toughness and high crack resistance.
It should be re-dried under 300-350ºC for 2 hours. Rust,grease and moisture on the weldment should be removed before welding.
Usage: about agglomerated saw welding flux
Matching with suitable welding wires (H08C,H08MnA,H10Mn2,H08MnMoA,H08Mn2MoA),it can weld many kinds of steel pipes,such as X52,X60,X65,X70,X80,etc.It also can be used in 16Mn,Q345C etc structural steel submerged arc welding.
Chemical Composition(%) about agglomerated saw welding flux
Mechanical Performance of the Deposited Metal
Packing Details:
Bag:25 KGS/Kraft Bag With Plastic Lining Inside
Pallet:40 Bags(1 Ton)/Plywood Pallet
Container:20-24 Tons/Container
OEM Packing Design Can Be Accept According To Your Requirement
Our service
1)Prime quality+Competitive price+Thoughtful Service=100% Satisfication
2)We can research and produce customerized fluxes according to your different demands.
3)SAW Welding Flux Expert- One Stop Solution For Submerged Arc Welding consumables.
APPLICATION:
Company Introduction:
LAIWU HULIN WELDING MATERIALS CO.,LTD. is top three original factory of welding consumables in China.
Factory was founded in 1994, quality systerm: ISO9001-2008.
Main products: SJ101,SJ101G,SJ301,SJ50,SJ601.HJ431,HJ107,HJ260 etc.
Application: Spiral steel pipe,API pipe, Structural steel, LPC Gas Cylinder, Pressure vessel, Boiler, Bridges etc.
Yearly capacity:30000mt
OEM & buyer label is ok. Technical support can be offered.
FAQ:
Q. 1 Can you provide free sample?
A: Total free sample(including freight cost) can be offered
Q. 2 What is your delivery time?
A: Within 7 days after receiving deposit.
Q: 3 Is your price competitive with other companies?
A: Our goal is to give the best price with same quality and best quality with the same price. We do everything we can to reduce your cost.
Q. 4 How about OEM?
A: OEM IS OK.
Q. 5 Why we should choose your company?
A: Firstly, we are ORIGINAL factory. We can guarantee delivery time and provide special requirements for customers.
Secondly, we have professional foreign trade team with high efficiency communications and professional solutions.
Thirdly, we have special team work for after sales services 24*7 to help you slove any kind of problem
Technical data sheet
Specifications about agglomerated saw welding flux
AWS A5.17/5.23 F7A2-EM12K F7A4-EH14 F7A6-EG-G F8A4-EA4-A4
EN760 SA FB 1 55 AC H5
Description:about agglomerated saw welding flux
SJ101G is an agglomerated fluoride-basic type flux. Basicity: 2.0 (B//W) It is gray and round grain,mesh:10-45(2.0-0.4mm). It can highly satisfy the steel welding requirements for oil gas pipeline. Either AC. or DC.can be used, the wire shall be connected to positive pole when applying DC. It has steady arc and the welding bead smooth and pleasing , rice weld formation, and easy in slag removing as well with perfect deposit metal welding technological characteristics. It has higher low-temperature impact toughness and high crack resistance.
It should be re-dried under 300-350ºC for 2 hours. Rust,grease and moisture on the weldment should be removed before welding.
Usage: about agglomerated saw welding flux
Matching with suitable welding wires (H08C,H08MnA,H10Mn2,H08MnMoA,H08Mn2MoA),it can weld many kinds of steel pipes,such as X52,X60,X65,X70,X80,etc.It also can be used in 16Mn,Q345C etc structural steel submerged arc welding.
Chemical Composition(%) about agglomerated saw welding flux
SiO2+TiO2 | Al2O3+MnO | Ca O+MgO | CaF2 | S | P |
15-25 | 23-30 | 25-35 | 15-25 | ≤0.03 | ≤0.04 |
Mechanical Performance of the Deposited Metal
WIRE | Yield Point Rel(MPa) | Tensile Strength Rm(MPa) | Elongation A (%) | Charpy V Notch Impact Strength KV2(J) | ||
-20ºC | -40ºC | -50ºC | ||||
EM12K | ≥400 | 490~660 | ≥22 | ≥60 | ||
EH14 | ≥400 | 480~660 | ≥22 | ≥70 | ≥60 | ≥29 |
EG | ≥460 | 530~690 | ≥22 | ≥90 | ≥80 | ≥42 |
EA4 | ≥500 | 580~700 | ≥22 | ≥65 | ≥60 | ≥38 |
Packing Details:
Bag:25 KGS/Kraft Bag With Plastic Lining Inside
Pallet:40 Bags(1 Ton)/Plywood Pallet
Container:20-24 Tons/Container
OEM Packing Design Can Be Accept According To Your Requirement
Our service
1)Prime quality+Competitive price+Thoughtful Service=100% Satisfication
2)We can research and produce customerized fluxes according to your different demands.
3)SAW Welding Flux Expert- One Stop Solution For Submerged Arc Welding consumables.
APPLICATION:
Company Introduction:
LAIWU HULIN WELDING MATERIALS CO.,LTD. is top three original factory of welding consumables in China.
Factory was founded in 1994, quality systerm: ISO9001-2008.
Main products: SJ101,SJ101G,SJ301,SJ50,SJ601.HJ431,HJ107,HJ260 etc.
Application: Spiral steel pipe,API pipe, Structural steel, LPC Gas Cylinder, Pressure vessel, Boiler, Bridges etc.
Yearly capacity:30000mt
OEM & buyer label is ok. Technical support can be offered.
FAQ:
Q. 1 Can you provide free sample?
A: Total free sample(including freight cost) can be offered
Q. 2 What is your delivery time?
A: Within 7 days after receiving deposit.
Q: 3 Is your price competitive with other companies?
A: Our goal is to give the best price with same quality and best quality with the same price. We do everything we can to reduce your cost.
Q. 4 How about OEM?
A: OEM IS OK.
Q. 5 Why we should choose your company?
A: Firstly, we are ORIGINAL factory. We can guarantee delivery time and provide special requirements for customers.
Secondly, we have professional foreign trade team with high efficiency communications and professional solutions.
Thirdly, we have special team work for after sales services 24*7 to help you slove any kind of problem
CONTACT US: